Tecna 4642N – 20 KVA Foot Rocker Arm Spotwelder
Manufacturer: Lockformer
Condition: NEW
Location: F.O.B Factory
Description:
TECNA spot welders are designed to meet every need of spot welding. The new stationary ergonomic frame designed by TECNA helps to facilitate the operator's work.
The control unit has been positioned frontally to allow the operator to view the welding data even during the working cycle.
The pneumatic commands and the compressed air pressure gauge have been placed at the top for easier adjustment and reading.
Some of the products aren't available in stock all the time, we are willing to work with the manufacturers and obtain them for you. Please call us on 866-493-4771
TECNA spot welders are designed to meet every need of spot welding. The new stationary ergonomic frame designed by TECNA helps to facilitate the operator's work.
The control unit has been positioned frontally to allow the operator to view the welding data even during the working cycle.
The pneumatic commands and the compressed air pressure gauge have been placed at the top for easier adjustment and reading.
Write Your Own Review
- Nominal power at 50%: 20
- Maximum welding power: 39
- No load secondary voltage: 4
- Maximum short circuit current: 12
- Maximum welding current on steel: 9.6
- Thermal current 100%: 3500
- Supply voltage 50Hz: 400
- Cables section L=10 m: 10
- Cables section L=30 m: 10
- Delayed fuses: 40
- Min. electrodes throat depth: 380
- Max. electrode force (6 bar): 150
- Electrode stroke: Oct-60
- Max. electrodes throat depth: 700
- Max. electrode force (6 bar): 80
- Electrode stroke: 15-105
- Short circuit current with L max. : 8.8
- Arms diameter: 40
- Electrode-holders diameter: 22
- Standard electrodes cone diameter: 14.8
- Water cooling: 3
- Aerial noise produced: < 70
- working stroke: 20
- welding time: 26
- welding current: 9
- working rating in welds/min: 10
- Net weight (approximately): 146
- Arms adjustable in length allowing a better working flexibility
- Chrome-copper electrode-holders for long life and heavy duty service, designed for straight and angled fitting
- Adjustable electrode stroke
- Epoxy resin coated transformer
- Water-cooled transformer, arms and electrodes
- Microprocessor control unit TECNA TE101
- Adjustable electrode force; a microswitch starts the welding cycle when the desired pre-set value is reached The foot pedal is adjustable in length