Scotchman CPO 275 PKPD Cold Saw
Manufacturer: Scotchman Industries
Condition: NEW
Location: F.O.B Factory
Description: Scotchman CPO 275 PKPD Cold Saw
Some of the products aren't available in stock all the time, we are willing to work with the manufacturers and obtain them for you. Please call us on 866-493-4771
Scotchman CPO 275 PKPD Cold Saw
Additional Information
| Ships the same day | No |
|---|---|
| Free shipping icon | No |
| Include in Google Feed | No |
Write Your Own Review
- Cutting Speeds: Must Specify when Ordering
- LT(Low Turn) designed for solid mild steel, solid stainless steel & thick wall pipe: LT (Low Turn): 30 rpm / 60 rpm - Motor rate: 2 HP
- HT(High Turn) designed for thin wall tube .060 wall thickness or thinner and non-ferrous material: HT (High Turn): 60 rpm / 120 rpm - 1.5 HP
- SS(Single Speed) designed for 220v 1 ph applications: SS (Single Speed) 60 rpm - Motor rate: 2 HP
- 90 Degree Tubing: 90 Deg
- 90 Degree Round: 3-3/8" (86 mm)
- 90 Degree Square: 3" x 3" (76 x 76 mm)
- 90 Degree Rectangle: 3" x 2-3/8" (76 x 60 mm)
- 45 Degree Tubing: 45 Degree
- 45 Degree Round: 2" (51 mm)
- 45 Degree Square: 2" x 2" (51 x 51 mm)
- 45 Degree Rectangle: 3" x 2" (76 x 51 mm)
- 90 Degree Solid: 90 Deg
- 90 Degree Round: 1-1/2" (38 mm)
- 90 Degree Square: 1-1/2" x 1-1/2" (38 x 38 mm)
- Arbor Bore: 1-1/4"
- Pin Spacing: 2/8/1945
- Width: 21-7/8"
- Depth: 43-1/2"
- Height not including handle: 53-1/4"
- Height from floor to vise: 36-1/8"
- Shipping Weight: 670 lbs
- Semi-Automatic Cycle
- Air Operated Double Self-Centering Vise Assures Burr-Free Cuts
- Pneumatic Power Down Feed with Electric Controls
- Emergency Stop Button
- Miter Capabilities 45 degrees Left and 45 degrees Right
- Miter Locking Device: Quick, Accurate Setting-Stops at 45 Degrees Left, Straight 90 Degrees, and 45 Degrees Right
- Capable of Slotting
- Two Cutting Speeds (LT 30/60 rpm Or HT 60/120 rmp)
- Hardened and Ground Worm and Wheel Gear Box
- Worm Wheel of Top Quality Bronze
- Chip Drawer
- 7 Gallon Coolant Tank with Pump
- One 10" Diameter (250 mm) HSS Blade
- One Blade Wrench
- One Gallon Concentrated Coolant
- 230 or 460 Volt/3 Phase Electrics (must specify voltage)
- Warranty three Years on Parts
- Made in USA