Scotchman CPO 350 PK Cold Saw
Manufacturer: Scotchman Industries
Condition: NEW
Location: F.O.B Factory
Description: Scotchman CPO 350 PK Cold Saw
Some of the products aren't available in stock all the time, we are willing to work with the manufacturers and obtain them for you. Please call us on 866-493-4771
Scotchman CPO 350 PK Cold Saw
Additional Information
| Ships the same day | No |
|---|---|
| Free shipping icon | No |
| Include in Google Feed | No |
Write Your Own Review
- Cutting Speeds: Must Specify when Ordering
- LT(Low Turn) designed for solid mild steel, solid stainless steel & thick wall pipe: LT (Low Turn): 22 rpm / 44 rpm - Motor rate: 3 HP
- HT(High Turn) designed for thin wall tube .060 wall thickness or thinner and non-ferrous material: HT (High Turn): 44 rpm / 88 rpm - Motor rate: 2.5 HP
- VS (Variable Speed) ~ wired 230/460, 3-ph: VS (Variable Speed): 11 / 177 rpm - Motor rate: 5 HP
- VS (Variable Speed) ~ wired 220, 1-ph: VS (Variable Speed) ~ 11 / 177 rpm - Motor rate: 5 HP
- SS (Single Speed) designed for 220v 1 ph applications: SS (Single Speed): 44 rpm - Motor rate: 3 HP
- 90 Degree Tubing: 90 Deg
- 90 Degree Round: 4-1/2" (114 mm)
- 90 Degree Square: 4-1/4" x 4-1/4" (108 x 108 mm)
- 90 Degree Rectangle: 5-1/2" x 4" (140 x 102 mm)
- 45 Degree Tubing: 45 Deg
- 45 Degree Round: 4" (102 mm)
- 45 Degree Square: 4" x 4" (102 x 102 mm)
- 45 Degree Rectangle: 4" x 4" (102 x 102 mm)
- 90 Degree Solid: 90 Degree
- Factory Wired: Specify 208 3 ph, 230 3 ph,460 3 ph, 575 volt 3 ph 60 hz, 220 volt 1 ph 60 hz (SS model only)
- Maximum Diameter Blade: 14"
- Arbor Bore: 1-9/16"
- Pin Spacing: 4/12/1964
- Width: 21-7/8"
- Depth: 43-1/2"
- Height not including handle: 56-1/4"
- Height from floor to vise: 37-7/16"
- Shipping Weight: 660 lbs
- Air Operated Power Double Self-Centering Vise Assures Burr-Free Cuts
- Operator Controlled Trigger Switch
- Miter Capabilities 45 degrees Left and 45 degrees Right
- Miter Locking Devise: Quick, Accurate Setting-Stops at 45 Degrees Left , Straight 90 Degrees, and 45 Degrees Right
- Capable of Slotting
- Two Cutting Speeds (LT 22/44 rpm Or HT 44/88 rpm)
- Double Reduction, Hardened and Ground Worm and Wheel Gear Box
- Worm Wheel of Top Quality Bronze
- Chip Drawer
- 7 Gallon Coolant Tank with Pump
- One 12-1/2" Diameter (315 mm) HSS Blade
- One Blade Wrench
- One Gallon Concentrated Coolant
- 230 or 460 Volt /3 Phase Electrics (must specify voltage)
- Warranty three Years on Parts
- Made in USA