Description
The CORNERMATIC PLUS® was specifically designed to address the difficulty with inserting corners into some styles of fitting ductwork. It joins other world- wide successful Cornermatics such as the Dual-Head and the Corner Cadet® in reducing shop labor. Three years in development brings to the trade a machine that can handle any TDC®/TDF® fitting assembled on a bench. The CORNER- MATIC PLUS® automatically and effortlessly inserts and crimps TDC®/TDF® cor-ners in seconds. Lets you do a duct section (eight corners) in about 20 seconds in any gauge, 16 through 26. Generally, tests have shown 80 ducts/hour vs. 15 ducts/hour for manual insertion.
specifications
- Capacity: 16 to 26 (.050" to .022" / 1.3mm to 0.6mm) Mild Steel Only
- Other: Quick-loading box holds 80 corners and loads in 10 second
- Speed: Approximately 2 ½ seconds per corner
- Motor/Voltage Air: 85 - 100 PSI (5.5 - 7 Bar)
- Motor/Voltage Electrical: 110VAC, 60 Hz
- Dimensions: Width: 32" x 36" 34"
- Weight: 600 lbs
features
- Specifically designed for the fabrication of duct fittings – even your toughest inside or outside angle off-set transition fitting from 16-26
- Fully automated – no switches or foot pedals – just push in, Cornermatic® Plus™ does the
- Completes (8) corner inserts in
- New quick loading “Sleeve” packaging technology speeds loading of the new ‘Universal’ corner.
- Corners feed from below the work-surface allowing a clean, unobstructed work
- Handles tight square throat elbows and flex
- Ask about optional table or ‘in-floor’ mounted
- Bring your fitting productivity up to duct section standards!
- Corners are inserted square and fully crimped.
- No need to change the crimping adjustment when inserting corners in 16 to 26 gauge ducts-all automatically and 26ga corners are tight).
- Each quick loading box holds 80 corners-loads in ten (10) seconds
- Corners are shipped presorted and oriented for direct loading into the magazine.
- No need for hand sorting.
- Push the ductwork or fitting into the flange guides and the machine automatically does the rest.
- Will handle any fitting built to SMACNA standards
- Handles particularly difficult inside angles on off-set transitions with a breeze
- Easily handles tight square throats
- Will do odd size fittings such as flex connectors and curbs
manual
videos
Additional Information
Ships the same day | N/A |
---|---|
Free shipping icon | N/A |
Part Number | No |
Include in Google Feed | No |