Description
Scotchman CPO 275 PKPD Cold Saw
specifications
- Cutting Speeds: Must Specify when Ordering
- LT(Low Turn) designed for solid mild steel, solid stainless steel & thick wall pipe: LT (Low Turn): 30 rpm / 60 rpm - Motor rate: 2 HP
- HT(High Turn) designed for thin wall tube .060 wall thickness or thinner and non-ferrous material: HT (High Turn): 60 rpm / 120 rpm - 1.5 HP
- SS(Single Speed) designed for 220v 1 ph applications: SS (Single Speed) 60 rpm - Motor rate: 2 HP
- 90 Degree Tubing: 90 Deg
- 90 Degree Round: 3-3/8" (86 mm)
- 90 Degree Square: 3" x 3" (76 x 76 mm)
- 90 Degree Rectangle: 3" x 2-3/8" (76 x 60 mm)
- 45 Degree Tubing: 45 Degree
- 45 Degree Round: 2" (51 mm)
- 45 Degree Square: 2" x 2" (51 x 51 mm)
- 45 Degree Rectangle: 3" x 2" (76 x 51 mm)
- 90 Degree Solid: 90 Deg
- 90 Degree Round: 1-1/2" (38 mm)
- 90 Degree Square: 1-1/2" x 1-1/2" (38 x 38 mm)
- Arbor Bore: 1-1/4"
- Pin Spacing: 2/8/1945
- Width: 21-7/8"
- Depth: 43-1/2"
- Height not including handle: 53-1/4"
- Height from floor to vise: 36-1/8"
- Shipping Weight: 670 lbs
features
- Semi-Automatic Cycle
- Air Operated Double Self-Centering Vise Assures Burr-Free Cuts
- Pneumatic Power Down Feed with Electric Controls
- Emergency Stop Button
- Miter Capabilities 45 degrees Left and 45 degrees Right
- Miter Locking Device: Quick, Accurate Setting-Stops at 45 Degrees Left, Straight 90 Degrees, and 45 Degrees Right
- Capable of Slotting
- Two Cutting Speeds (LT 30/60 rpm Or HT 60/120 rmp)
- Hardened and Ground Worm and Wheel Gear Box
- Worm Wheel of Top Quality Bronze
- Chip Drawer
- 7 Gallon Coolant Tank with Pump
- One 10" Diameter (250 mm) HSS Blade
- One Blade Wrench
- One Gallon Concentrated Coolant
- 230 or 460 Volt/3 Phase Electrics (must specify voltage)
- Warranty three Years on Parts
- Made in USA
videos
Additional Information
Ships the same day | No |
---|---|
Free shipping icon | No |
Part Number | No |
Include in Google Feed | No |