8900 Super Speed Cleatformer
The Lockformer 8900 Cleatformer has 9 forming stations with one (1) inboard forming position for the Flat “S” Cleat and two (2) outboard stations for Auxiliary Roll Sets. It is a stand-alone machine that has a 5 HP Motor and runs on 230 Volt, Three Phase Power with 100 FPM running speed. Over time, you may have to replace shafts, idler gears, drive gears and the fiber gear assembly. It is also common to replace certain auxiliary tooling including 3-in-1 entrance gauges and the Pittsburgh opening roll guide and holder. We are proud to offer official Lockformer-brand replacement parts for your 8900 Cleatformer. Please review the parts list to find the replacement parts you need or contact us if you need assistance.
8900 Super Speed Cleatformer
-
L-60954 1/2-13 x 1 FH SCS
$1.97 -
L-61040 10-24 HN - Hex Nut
$1.97 -
L-61101 5/16-18 HN - Hex Nut
$1.97 -
L-61120 - 3/8-16 HN - Hex Nut
$1.97 -
L-61122 3/8-16 HN Fin
$1.97 -
L-61160 1/2-13 HN Hvy. SF
$1.97 -
L-61300 3/8-16 - Steel Jam Nut
$1.97 -
L-62026 052 Plate Spacer Washer
$1.96 -
L-62029 3/8 x 1/16 Flat Washer
-
L-62301 3/8" C-Washer
$2.26 -
L-62340 Lockformer 3/8 Belville Spring Washer
$1.70 -
L-62341 Lockformer 5/8 Belville Spring Washer
$3.05 -
L-62360 3/16 Lock Washer
$1.97 -
L-62363 3/8 Lock Washer
$1.97 -
L-62364 1/2 Lock Washer
$1.97 -
L-62402 Woodruff Key #15
$2.13 -
L-62551 Hold Down Stud - 3/8-16 x 6-1/2
$8.65 -
L-62633 Dowel Pin 3/8 x 1
$1.97 -
L-66090 B1416 Bearing (Torr)
$28.41 -
L-66100 B1612 Bearing (Torr)
$19.90 -
L-66111 HJ1624-12 Bearing (Torr)
$34.60 -
L-66320 NTA-1625 Thrust Race Bearing (Torr.)
$7.11 -
L-66321 TRC-1625 Thrust Race Washer (Torr.)
$6.20 -
L-66422 Bronze Thrust Washer
$9.12