Triplex "S" Slip & Drive Cutting Attachment
The Lockformer Triplex Slitting Attachment is an optional tool that can be mounted to the Triplex Cleatformer. The Slitting Attachment has two (2) sets of cutting wheels that are used to cut material and automatically feed into the “S” Cleat Rolls and Drive Cleat Rolls. With use, it is common to replace these cutting wheels as they will become dull and nicked up over time. Please review the parts list to find the replacement parts you require or contact if you need assistance.
Triplex "S" Slip & Drive Cutting Attachment
-
L-60090 3/8-16 x 3/4 Hex Cap Screw
$1.97 -
L-60093 3/8-16 x 1 Hex HD Cap Screw
$1.97 -
L-60102 3/8-16 x 5 Lg. Hex Capscrew
$1.97 -
L-60162 1/2-13 x 3-1/2 HHCS
$1.97 -
L-60498 5/16-18 x 3/8 SHCS
$1.97 -
L-60576 10-24 x 1/2 RHMS
$1.97 -
L-60876 3/8-16 x 1-1/4 Carriage Bolt
$1.97 -
L-60877 - 3/8 x 1-3/4 Carriage Bolt
$1.97 -
L-61020 8-32 Hex Nut
$1.97 -
L-61120 - 3/8-16 HN - Hex Nut
$1.97 -
L-62002 3/16 x .049 Washer
$1.97 -
L-62029 3/8 x 1/16 Flat Washer
-
L-62301 3/8" C-Washer
$2.26 -
L-62360 3/16 Lock Washer
$1.97 -
L-62363 3/8 Lock Washer
$1.97 -
L-62420 3/16 Square Key
$1.97 -
L-62424 3/16 Square Key 1/2
$1.97 -
L-62502 Retaining Ring
$1.97 -
L-66080 B1412 Bearing (Torr)
$17.69 -
L-66100 B1612 Bearing (Torr)
$19.90 -
L-66110 B2812 Bearing (Torr.)
$38.36 -
L-66421 Bronze Thrust Washer
$2.88 -
L-66422 Bronze Thrust Washer
$9.12 -
L-66425 Bronze Thrust Washer
$4.60