Scotchman CPO 350 PK Cold Saw

Cutting Speeds: Must Specify when Ordering
LT(Low Turn) designed for solid mild steel, solid stainless steel & thick wall pipe: LT (Low Turn): 22 rpm / 44 rpm - Motor rate: 3 HP
HT(High Turn) designed for thin wall tube .060 wall thickness or thinner and non-ferrous material: HT (High Turn): 44 rpm / 88 rpm - Motor rate: 2.5 HP
VS (Variable Speed) ~ wired 230/460, 3-ph: VS (Variable Speed): 11 / 177 rpm - Motor rate: 5 HP
VS (Variable Speed) ~ wired 220, 1-ph: VS (Variable Speed) ~ 11 / 177 rpm - Motor rate: 5 HP
SS (Single Speed) designed for 220v 1 ph applications: SS (Single Speed): 44 rpm - Motor rate: 3 HP
90 Degree Tubing: 90 Deg
90 Degree Round: 4-1/2" (114 mm)
90 Degree Square: 4-1/4" x 4-1/4" (108 x 108 mm)
90 Degree Rectangle: 5-1/2" x 4" (140 x 102 mm)
45 Degree Tubing: 45 Deg
45 Degree Round: 4" (102 mm)
45 Degree Square: 4" x 4" (102 x 102 mm)
45 Degree Rectangle: 4" x 4" (102 x 102 mm)
90 Degree Solid: 90 Degree
Factory Wired: Specify 208 3 ph, 230 3 ph,460 3 ph, 575 volt 3 ph 60 hz, 220 volt 1 ph 60 hz (SS model only)
Maximum Diameter Blade: 14"
Arbor Bore: 1-9/16"
Pin Spacing: 4/12/1964
Width: 21-7/8"
Depth: 43-1/2"
Height not including handle: 56-1/4"
Height from floor to vise: 37-7/16"
Shipping Weight: 660 lbs

Air Operated Power Double Self-Centering Vise Assures Burr-Free Cuts
Operator Controlled Trigger Switch
Miter Capabilities 45 degrees Left and 45 degrees Right
Miter Locking Devise: Quick, Accurate Setting-Stops at 45 Degrees Left , Straight 90 Degrees, and 45 Degrees Right
Capable of Slotting
Two Cutting Speeds (LT 22/44 rpm Or HT 44/88 rpm)
Double Reduction, Hardened and Ground Worm and Wheel Gear Box
Worm Wheel of Top Quality Bronze
Chip Drawer
7 Gallon Coolant Tank with Pump
One 12-1/2" Diameter (315 mm) HSS Blade
One Blade Wrench
One Gallon Concentrated Coolant
230 or 460 Volt /3 Phase Electrics (must specify voltage)
Warranty three Years on Parts
Made in USA

Additional Information