Description
TECNA spot welders are designed to meet every need of spot welding. The new stationary ergonomic frame designed by TECNA helps to facilitate the operator's work. The control unit has been positioned frontally to allow the operator to view the welding data even during the working cycle. The pneumatic commands and the compressed air pressure gauge have been placed at the top for easier adjustment and reading.
specifications
- Nominal power at 50%: 50
- Maximum welding power: 82
- Maximum short circuit current: 16.5
- Thermal current 100%: 5700
- No load secondary voltage: 6.1
- Supply voltage 50Hz: 400
- Cables section L=30 m: 35
- Delayed fuses: 100
- Insulation class: F
- Min. electrodes throat depth: 480
- Max. electrode force (6 bar): 260
- Electrode stroke: May-75
- Max. electrodes throat depth: 800
- Max. electrode force (6 bar): 160
- Electrode stroke: 5-120
- Max short circuit cuttent with max throat depth: 12.2
- Gap min. (OPTION 4638): 195
- Gap max. (OPTION 4638): 500
- Max short circuit current with max. gap (OPTION 4638): 12.6
- Arms diameter: 50
- Electrode-holders diameter: 25
- Standard electrodes cone diameter: 14.8
- Compressed air supply: 6.5
- Air for 1000 spots (6 bar): 6.2-4.5
- Water cooling: 4
- Aerial noise produced: < 70
- Working stroke: 20
- Welding time: 24
- Welding current: 12.4
- Working rating in welds/min: 15
- Net weight: 223
features
- Chrome-copper electrode-holders for heavy duty and long life, designed for both straight and angled fitting.
- Water-cooled epoxy resin coated transformer.
- Water-cooled arms, electrodes and electrode-holders.
- Microprocessor control unit TECNA TE101.
- USB Port for data storage (only with TE550).
- The air operated lubrication free cylinder eliminates oil mist.
- Protected filter assembly with gauge.
- Two-stage electric foot-pedal for clamping and welding pieces only if correctly positioned.
- Pre-connected for additional electric foot-pedal for the direct recalling of welding program No.2. This function is helpful when different kinds of welding are to be performed on the same piece.
- Arms: gap 280 mm, adjustable depth 320 mm.
- Adjustable electrodes stroke for max. working rate.
videos
Additional Information
| Ships the same day | N/A |
|---|---|
| Free shipping icon | N/A |
| Part Number | N/A |
| Include in Google Feed | N/A |